PL-40M
Cotton fabric with a high temperature phenolic resin containing molybdenum
disulfide for better wear performance. PL-40M works well in low duty applications
for compressors and vacuum pumps. Applications include agricultural spreaders,
liquid waste, vacuum pumps and dairy pumps.
PL-60
Very fine weave bleached cotton fabric with a high temperature phenolic
resin. This material offers a high degree of resin impregnation which
provides excellent dimensional stability. PL-60 is specifically recommended
for motor vanes used in air motors, starter motors and small air tools.
PL-62
Fine weave cotton fabric with a high temperature phenolic resin, similar
to PL-60, except it has better dimensional stability characteristics.
Black in color and is recommended for air motors, starter motors and small
air tools.
PG-50
Graphite fibre fabric with a high temperature phenolic resin. It has excellent
moisture resistance and physical properties. This material has gained
acceptance as an asbestos replacement in high vacuum pumps.
EK-50
Aramid fibre composite fabric bonded with a high temperature epoxy resin.
EK-50 has tremendous strength characteristics and excellent moisture resistance.
This material performs well in lubricated air motors.
MK-50
Aramid fibre composite fabric with a melamine resin. MK-50 has excellent
moisture resistance and chemical resistance while maintaining dimensional
stability. Applications include rotor vanes for compressors and vacuum
pumps for industrial processing and liquefied gas transfer. 
PK-50N
Aramid fibre composite fabric bonded with a high temperature phenolic
resin. PK-50N has excellent mechanical strength at elevated temperatures
in adverse environments. Applications include rotor vanes for vacuum pumps
for the dairy, liquid waste, oil refining and mining industries.
|
N1
A staple fiber nylon fabric grade of Lamitex® impregnated with phenolic
resin. Electrical properties of XXXP and mechanical toughness of Grade
C. Improved insulation resistance for high himidity applications.
G-30
Sophisticated high performance woven glass fabric bonded with polyimide
resin. Specially developed to provide engineers with a plastics material
capable of continuous long term use at 500°F and higher. Possesses
excellent dimensional stability, mechanical and electrical properties
which are well maintained at elevated temperatures. Has machining characteristics
similar to Grades G10 and G11.
PF-30
Woven organic reinforcement with high temperature phenolic resin and graphite.
Has properties similar to Grade C-YB but better temperature rating and
lower wear rates. This grade was developed as a bearing material with
properties similar to asbestos phenolics. Maximum temperature 285°F.
#136
Mica paper epoxy laminate. This grade of Lamitex™ has tensile and
flexural properties equal to or better than G-7 glass silicone Lamitex™,
but with excellent corona resistance in Class F (155°C) requirements.
#146
Mica paper silicone resin laminate with increased temperature and electrical
properties, but lower strengths than #136 Lamitex™ .
 G-10
CR & G-11 CR
Cryogenic Glass Epoxy Lamitex® material maintains its electrical insulation
properties and superior strength at temperatures as low as 4°F. It
additionally meets MIL-I-247682 Type GEE/CR. Application acceptance has
been established in super conductor power coils, high energy accelerators,
superconducting generators and magnetic levitation for high speed rail
transportation.
PEP-6
Woven polyester fabric with epoxy resin laminate. Because of its excellent
resistance to corrosive Florine containing gases, it has found acceptable
usage in SF6 Sulfur Hexafluoride gas electrical switches.
|
